DIY Appliance Repair Tips

Wait! Before you get the itch to call an appliance repair CITY for help, you can keep your appliances running like new with the help of a lot of the troubleshooting tips in this post.

1. Smelly Washing Machine

A foul odor in your washer can defeat the entire purpose of the appliance! If you are in the process of trying to get your laundry items so that they are clean and fresh, but your washer is not cooperating, run an cycle without clothes/laundry in hot water and pour in 2 cups of white vinegar and half of a cup of baking soda to eliminate the unpleasant smell. This issue often happens in front-loading washing machines. To ensure no more odors in the future, leave the door open following washes to let it dry out.

2. Inefficient Refrigerant

A lukewarm refrigerator is never a welcome sign. A warm refrigerator won’t keep drinks cool, and the food inside could also be on the verge of spoiling! In many cases, your refrigerator won’t be in need of repair; interior could just need a cleaning. Or the coils on the back of the refrigerator are overdue for cleaning.

Unplug it and move it out from the kitchen wall before wiping down the refrigerator coils. If you cannot notice instant cooling improvement, it is time to reach out to a professional appliance repair service in CITY for troubleshooting.

3. Clicking Igniter on Stove

If the igniter on a gas stove clicks nonstop and the burner will not light, check to make sure the burner cap is in place and correctly aligned. You could possibly experience this problem if you have recently had a boil over or liquid spill on the top of the stove.

If that is not the case, the cause is probably a clogged igniter. To clean , first remove the burner top and clear away any dirt. You can use a pin to pick dirt from the grooves. If that does not fix the issue, it’s safest to not take a lighter apart for anyone without training; hire a professional appliance repairman to investigate the problem.

4. Broken Garbage Disposal

A garbage disposal includes self-protection in the form of an overload trip. If it gets filled up, overheats, grinds for too long, or has a different problem, the disposal might just have to be reset instead of replaced. Be sure the power switch is turned OFF. Then, locate the button on the disposal unit under the kitchen sink and then press the button. If the switch won’t stay in, just wait 10 minutes and then try again. Turn on the water and then turn the button on.

If the garbage disposal in the sink is filled up with food and you hear nothing but a humming noise instead of the grinding of waste, you might need to turn the disposal blades with a hex key to remove the jam. Then, press the reset switch to get the garbage disposal grinding again. If these tips fail to get it working like it should, do not allow the urge to stick one of your hands down into the disposal to investigate. Be smart and set up an appointment with a professional appliance company in CITY.

5. No Power from Outlet

In the bathroom or kitchen, the outlets must be installed with GFCI switches to protect from harm in wet areas. If a GFCI outlet is not providing power, push in the red reset switch to see if that restores juice.

If not, or if you’re trying a standard outlet, be certain that a breaker hasn’t been tripped in your home’s breaker panel. If you’re uncertain if a circuit breaker was tripped, switch it so it is in the OFF position and back onto the ON position. But remember, safety by wiring is critical. If you have concerns, call a professional.

6. Wobbling Washing Machine

A wobbling washer can produce a loud banging and isn’t a good method to clean clothing. If your washing machine starts shaking around, the washing machine could be broken. To repair this problem, rotate the legs of the appliance to lower or lift all corners until it is balanced. One other possible case is the appliance is off balance. Open the top and rearrange the shirts and pants so that they’re evenly dispersed within the drum of the appliance.

Trying this could help your washer to not need to work quite as hard. If you do attempt to rearrange the laundry a few times without success, do not ignore the issue. You might have a loose motor or drum mount to repair, which should be easy enough for a professional technician to repair. But if you continue to operate your washing machine when it has this issue might ruin other components and cause a more costly repair later.

Call for Help

If none of these tips can fix your problems, you can schedule service from Hub City Appliance Repair!

OTHER RESOURCES:

Appliance Repair Cost
Appliance Safety
Emergency Appliance Repair
Repair or Replace Appliances
Refrigerator Parts